Done Right Electrical Logo

Consumer Mains Rewiring

  1. Level 2 Electrician
  2. Consumer Mains Rewiring

Need to Upgrade to 3 Phase Power for an EV Charger or Solar System?

Your consumer mains will absolutely need upgrading, and that is work that only a Level 2 Electrician can do.

The consumer mains, that's the cable from the street to your main switchboard, are the bottleneck for any major power upgrade.

Installing a high powered system like 3-Phase power for an EV charger or large solar array means the original mains cable won't be big enough for the required electrical capacity.

We specialise in essential Level-2 electrical services here at Done Right Electrical, safely handling the whole rewiring job and liaising with your energy provider.

We make sure your new electrical power supply has the capacity needed for tomorrow's demands!

☎️ Call Done Right Electrical today on 1300 061 795 ☎️

Book a Mains Rewiring Electrical Today!

Why Your Outdated Consumer Mains Needs a Level 2 Upgrade

The cable running from the street to your house is the most critical and often the most overlooked part of your entire electrical system. Since this wiring handles the total load of your home, its failure is a serious matter that only a Level 2 Electrician can fix. We also handle any necessary electrical repairs during the process.

The Dangers of Old Rubber or Paper Insulated Cables

Lots of homes in Sydney are still running on the original consumer mains wiring that's 40 to 60 years old. These old supply cables are wrapped in materials like rubber or paper that just fall apart over time.

⚡️ Fire & Shock Risk: Old insulation cracks and breaks down, leaving the copper wiring exposed. This is how major fire hazards and fatal electric shocks happen. The risks are severe when dealing with these electrical cables.

⚡️ Capacity Limit: The gauge (thickness) of these old cables is too small. They were only designed to handle lights, a fridge, and a kettle. Running a modern home, with air conditioning, computers, and induction cooking, causes them to dangerously overheat and fail prematurely. This leads to common electrical faults.

Non-Negotiable Electrical Defect Notices

For a lot of homes, upgrading isn’t optional; it’s mandatory. If your home has a major renovation or a new meter installation, the energy provider will often issue a defect notice that must be fixed.

The law requires you to replace your outdated consumer mains immediately since they are non-compliant and unsafe.

Ignoring this notice means the energy provider can cut off your power until the Level 2 upgrade is finished.

Level 2 electrician working on upgrading outdated consumer mains wiring in a switchboard and in accordance with all compliance legislation in Sydney

Rewiring for Modern Power: Capacity & Future Growth

Rewiring your consumer mains isn't just a repair; it’s an investment that gives you reliable electrical power and supports future growth.

Once those old, thin cables are replaced with modern, heavy duty wiring, your system instantly gets the capacity it needs to handle modern technology. This is the ultimate consumer mains upgrade.

Upgrading to 3-Phase Consumer Mains Power

The old wiring was the bottleneck for adding high draw electrical appliances. A mains upgrade gets rid of that limit, so you can install major systems safely and efficiently:

🚗 EV Chargers: A mains upgrade is crucial here. It provides the consistent, high power needed for a fast EV charger installation without tripping the system.

🌬️ Modern Climate Control: The mains upgrade lets you safely run large, ducted air conditioning or multiple heat pumps without worry.

🛁 Instant Hot Water: This gives you the high electrical load required to run powerful electrical appliances like instantaneous hot water systems or large electric ovens.

Supporting Major Appliance Upgrades

A standard single-phase system just won't be big enough for larger homes, workshops, or when you plan a high-powered EV charger installation. 

We handle upgrading your home to 3-Phase power, so you get a lot more electricity through three main cables. 

This safely gives you the extra capacity you need for large motors and lets you expand easily in the future.

Commercial Electrical Switchboard Upgrades

An outdated switchboard in your warehouse or commercial property is a major compliance risk that stops your business from growing. 

Still using old ceramic fuses or dealing with constantly tripping breakers? You risk equipment failure, costly power issues, and fire hazards.

Our expert electricians upgrade commercial switchboards to power your entire operation. We take care of:

⚠️ Safety & Compliance

We replace old fuses with modern RCD safety switches and circuit breakers. This makes sure your system meets every commercial safety code and insurance rule.

📈 Capacity for Growth

We install 3-Phase power systems to provide the robust capacity your business requires to easily expand in the future. 

⏳ Minimised Downtime

We work efficiently, scheduling major connection work for nights or weekends so we cause minimal disruption to your business hours.

Our Level 2 Mains Rewiring Process

Consumer mains rewiring is critical, high risk work. Only a Level 2 Electrician has the legal authorisation to complete it. We follow a clear, professional process to guarantee safety and a successful power transfer.

📵 Disconnection & Network Liaison

Our qualified electricians safely disconnect power at the street (the point of attachment). We then handle all the required paperwork with the energy provider, managing the entire installation so you don't have to deal with network approval hassle.

🪛 Rewiring, Installation & Testing

We remove the old, degraded main cable and install new, heavy duty electrical wiring that provides the required capacity. We then connect the new mains into your electrical switchboard. 

We finish by rigorously testing the system and coordinating with the energy provider for the final reconnection, turning your new system on safely.

Level 2 electrician working on upgrading outdated consumer mains wiring in a switchboard and in accordance with all compliance legislation in Sydney

Electricians for House Mains Installation Electrical Services

Don't risk electrical fires or unexpected power outages. Our electrical experts specialise in consumer mains installation and all high risk electrical work. We ensure your entire power supply meets the latest electrical standards.

We handle all your major electrical needs, from connecting to a private power pole to upgrading your main switchboard. We install modern electrical cables, safety switches, and circuit breakers to guarantee maximum protection.

☎️ Call our friendly team on 1300 061 795 or complete our enquiry form today. Make sure you get your electrical work Done Right first time!

Frequently Asked Questions About Consumer Mains Rewiring

What Is a Level 2 Electrician? Electrical Services Explained
7 Reasons Your Switchboard Needs An Upgrade
When Do You Need a Level 2 Electrician? 6 Common Reasons

Get the job done right with us!

Would you like a free quote from our Sydney Electricians?

0412 706 575

Find Out If Our Electrical Team Serves Your Area